D5263S G.M. International s.r.l.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

D5263S

  1. Products
  2. Intrinsically Safe Isolators
  3. Load Cell Input
D5263S
I.S. SIL2 Load Cell/Strain Gauge Bridge Repeater

The Load Cell/Strain Gauge Bridge Repeater D5263 module is a unit suitable for applications requiring SIL 2 level in safety related systems for high risk industries. The unit acts as a transparent galvanic isolated interface installed between a weighing indicator in Safe Area and a load cell (or group of load cells) in Hazardous Area; it appears at the terminals of the indicator as a single load cell equivalent to the one in the field. It provides a fully floating power supply voltage with remote sensing capability to load cell located in Hazardous Area and repeats, while isolating, the mV signal output to drive a load in Safe Area depending on the host system reference voltage. Up to four 350 Ω load cells, or five 450 Ω load cells, or ten 1000 Ω load cells can be connected in parallel. The Voltage reference (Safe Area side) is set as an external supply.

FEATURES

  • SIL 2 / SC 3
  • Input from Zone 0
  • Installation in Zone 2
  • Strain Gauge Bridge Transparent Repeater
  • Up to four 350 Ω load cells in parallel
  • High Accuracy
  • Three port isolation, Input/Output/Supply

Discover D5000


STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

1

Request a free and personalized quotation!

Contact us

Technical Data


Supply
Type 24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption 75 mA @ 24 Vdc with four 350 Ω load cells connected, typical.
Power Dissipation 1.8 W @ 24 Vdc with four 350 Ω load cells connected, typical.

Input
Type Up to four 350 Ω load cells in parallel or up to five 450 Ω load cells in parallel or up to ten 1000 Ω load cells in parallel.
Integration time 12.5 ms.
Bridge supply voltage 4.0 Vdc nominal.
Bridge output signal 1 to 4 mV/V.

Output
Type Same as the input signal.
Output impedance 500 Ω, typical.
Excitation voltage externally applied between 4 V and 15 V.
Transfer characteristic linear.
Response time ≤ 20 ms (10 to 90 % step change).

Performance
Ref. Conditions 24 V supply, 23 ± 1 °C ambient temperature.
Calibration accuracy ≤ ± 0.003 % input FSR, after system calibration.
Linearity accuracy ≤ ± 0.002 % input FSR.
Short fault ≤ ± 0.002 % input FSR for a 1 °C change.

Isolation
Test Voltage I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; Out/Supply 500 V.

Environmental conditions

Operating temperature temperature limits –40 to +70 °C.
Storage temperature temperature limits –45 to +80 °C.

Safety description
Equipment Associated apparatus and non-sparking electrical equipment.
Safety parameters Uo = 7.2 V, Io = 177 mA, Po = 471 mW at terminals 13-14-15-16-17-18. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70°C.

Mounting
Type DIN-Rail 35 mm, with or without Power Bus.
Weight about 165 g.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions Width 22.5 mm, Depth 123 mm, Height 120 mm.

Data Sheet


Datasheet of D5263 ( EN | IT | ES | DE | RU | CN | FR | JA | PT )

Instruction Manual


Instruction Manual D5263S ( EN )
Instruction Manual D5000-D5200 Series ( EN )
Instruction Manual SWC5090 ( EN | RU )
Safety Manual D5263S ( EN )
ATEX safety instruction manual for D5000 series ( EN | IT )
CCC Ex safety instruction manual for D5000 series ( EN | CN )
Ex safety instruction manual for D5000 series ( RU )

Certifications


Type Description Area Number Issued by Issue Date
ATEX TUV NORD ATEX D5263S, D5264S Series English Certificate ( EN ) Europe TUV 15 ATEX 170897 X TUV_NORD 2020-11-13
EMC D5000/D6000 EAC EMC Declaration of Conformity ( RU ) Eurasian Community ЕАЭС N RU Д-IT.АЖ38.В.00126/19 EUROCERT 2019-05-31
Ex D5000 CCC certificate for China ( EN ) China 2020322316000978 NEPSI 2024-03-22
Ex CML D5263, D5264 certificate for Japan ( EN ) Japan CML 20JPN2136X CML 2023-07-02
Ex EAC Ex Certificate for D5000 Series ( RU ) Eurasian Community ЕАЭС RU С-IT.ЕХ01.В.00018/19 CCVE 2019-04-25
Ex Emirates Certificate of Conformity D5263, D5264 series ( EN ) United Arab Emirates 23-11-90981/E23-11-094134/NB0002 SGS 2023-11-07
FSM TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) International TUV IT 22 SIL 0093 TUV_SUD 2022-07-25
IECEx TUV NORD IECEx D5263S, D5264S Series English Certificate ( EN ) International IECEx TUN 16.0005X TUV_NORD 2020-11-13
Maritime KR Maritime Certificate D5000 Series ( EN ) International MIL20769-EL002 KR 2020-10-12
Metrological Metrological Certificate Belarus for D5000/D6000 Series ( BE ) Belarus 15507 ROSSTANDART 2022-08-30
Metrological Metrological Certificate Kazakhstan for D5000/D6000 series ( KK ) Kazakhstan 1152 KMC 2021-08-05
Metrological Metrological Certificate Russia for D5000/D6000 series ( RU ) Russia OC.C.32.004.A n. 77881 ROSSTANDART 2020-07-28
SIL TUV C-IS-722160171 SIL Certificate Summary ( EN ) International C-IS-722160171 TUV_SUD 2022-10-14

Declarations of Conformity


EU Declaration of Conformity for D5263, D5264 ( EN | IT )
EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
Declaration of Conformity G3 compliance ( EN )

Dimensions


Image of D5263_size

Connections


Drawings


2d_drawing_D5200_dwg ( EN )
3d_drawing_D5200_dwg ( EN )
3d_drawing_D5200_stp ( EN )

Software


SWC5090 - Configurator for D5000/D5200, D6000/D6200 Series isolators ( EN )
Instruction Manual SWC5090 ( EN )