D6037S G.M. International s.r.l.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

D6037S

  1. Products
  2. Isolators
  3. Digital Input
D6037S
I.S. SIL2 Switch/Proximity Transistor-Out Repeater

The Switch/Proximity Detector Repeater D6037 is a module suitable for applications requiring SIL 2 level in safety related systems for high risk industries. The unit can be configured for switches or proximity detectors, located in Hazardous Area, and repeats the input state to an open-collector transistor in Safe Area. The selectable fault detection circuit is available for proximity sensors or switches equipped with end of line resistors. If needed, the output can also be inverted.

FEATURES

  • SIL 2 / SC 3
  • Input from Zone 0/Div. 1
  • Installation in Zone 2/Div. 2
  • High frequency transistor output
  • Field open and short circuit detection
  • In-field programmability by DIP Switch
  • Three port isolation, Input/Output/Supply
  • High Density, two channels per unit

Discover D6000


STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

1

Request a free and personalized quotation!

Contact us

Technical Data


Supply
Voltage 24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption 12 mA @ 24 Vdc with short circuit input and transistor closed, typical.
Power Dissipation 0.30 W @ 24 Vdc with short circuit input and transistor closed, typical.

Input
Input switching current levels ON ≥ 2.1 mA, OFF ≤ 1.2 mA.
Fault current levels open fault ≤ 0.2 mA, short fault ≥ 6.8 mA
Input equivalent source 8 V 1 kΩ typical (8 V no load, 8 mA short).

Output

Type
Open-collector/drain rating 100 mA @ 35 Vdc (≤ 1.5 V voltage drop).
Leakage current ≤ 50 μA @ 35 Vdc.
Response time ≤ 100 μs.
Frequency response 5 kHz maximum.

Isolation
Test Voltage I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/ I.S In 500 V; Out/Supply 500 V; Out /Out 500 V.

Environmental conditions

Operating temperature temperature limits –40 to +70 °C.
Storage temperature temperature limits –45 to +80 °C.

Safety description
Equipment Associated apparatus and non-sparking electrical equipment.
Safety parameters Uo = 10.5 V, Io = 22 mA, Po = 56 mW at terminals 7-8, 9-10. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.

Mounting
Type DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight about 110 g.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions Width 12.5 mm, Depth 123 mm, Height 120 mm.

Data Sheet


Datasheet of D6037 ( EN | FR | RU | DE | ES | IT | CN | JA | PT )

Instruction Manual


Instruction Manual D6037 ( EN )
Safety Manual D6037 ( EN )

Certifications


Type Description Area Number Issued by Issue Date
EMC D5000/D6000 EAC EMC Declaration of Conformity ( RU ) Eurasian Community ЕАЭС N RU Д-IT.АЖ38.В.00126/19 EUROCERT 2019-05-31
FSM TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) International TUV IT 22 SIL 0093 TUV_SUD 2022-07-25
SIL TUV C-IS-722134640-01 SIL Certificate Summary ( EN ) International C-IS-722134640-01 TUV_SUD 2022-10-14

Declarations of Conformity


EU Declaration of Conformity for D6000 series ( EN | IT )
EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
Declaration of Conformity G3 compliance ( EN )

Dimensions


Image of D6037_size

Connections


RELATED PRODUCTS


D6037D

D6037D

ACCESSORIES


OPT5096

OPT5096