D6263S G.M. International s.r.l.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

D6263S

  1. Products
  2. Isolators
  3. Load Cell Input
SIL2 Load Cell/Strain Gauge Bridge Repeater

The Load Cell/Strain Gauge Bridge Repeater D6263 module is a unit suitable for applications requiring SIL 2 level in safety related systems for high risk industries. The unit acts as a transparent galvanic isolated interface installed between a weighing indicator and a load cell (or group of load cells); it appears at the terminals of the indicator as a single load cell equivalent to the one in the field. It provides a fully floating power supply voltage with remote sensing capability to load cell and repeats, while isolating, the mV signal output to drive a load depending on the host system reference voltage. Up to four 350 Ω load cells, or five 450 Ω load cells, or ten 1000 Ω load cells can be connected in parallel. The Voltage reference is set as an external supply.

FEATURES

  • SIL 2 / SC 3
  • Strain Gauge Bridge Transparent Repeater
  • Up to four 350 Ω load cells in parallel
  • High Accuracy
  • Three port isolation, Input/Output/Supply

Discover D6000


STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

1

Request a free and personalized quotation!

Contact us

Technical Data


Supply
Type 24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption 75 mA @ 24 Vdc with four 350 Ω load cells connected, typical.
Power Dissipation 1.8 W @ 24 Vdc with four 350 Ω load cells connected, typical.

Input
Type Up to four 350 Ω load cells in parallel or up to five 450 Ω load cells in parallel or up to ten 1000 Ω load cells in parallel.
Integration time 12.5 ms.
Bridge supply voltage 4.0 Vdc nominal.
Bridge output signal 1 to 4 mV/V.

Output
Type Same as the input signal.
Output impedance 500 Ω, typical.
Excitation voltage externally applied between 4 V and 15 V.
Transfer characteristic linear.
Response time ≤ 20 ms (10 to 90 % step change).

Performance
Ref. Conditions 24 V supply, 23 ± 1 °C ambient temperature.
Calibration accuracy ≤ ± 0.003 % input FSR, after system calibration.
Linearity accuracy ≤ ± 0.002 % input FSR.
Short fault ≤ ± 0.002 % input FSR for a 1 °C change.

Isolation
Test Voltage In/Out 2.5 kV; In/Supply 2.5 kV; Out/Supply 500 V.

Environmental conditions

Operating temperature temperature limits –40 to +70 °C.
Storage temperature temperature limits –45 to +80 °C.

Mounting
Type DIN-Rail 35 mm, with or without Power Bus.
Weight about 165 g.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions Width 22.5 mm, Depth 123 mm, Height 120 mm.

Data Sheet


Datasheet of D6263 ( EN | IT | ES | DE | RU | CN | FR | JA | PT )

Instruction Manual


Instruction Manual D6263 ( EN )
Instruction Manual D5000-D5200 Series ( EN )
Safety Manual D6263S ( EN )

Certifications


Type Description Area Number Issued by Issue Date
EMC D5000/D6000 EAC EMC Declaration of Conformity ( RU ) Eurasian Community ЕАЭС N RU Д-IT.АЖ38.В.00126/19 EUROCERT 2019-05-31
FSM TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) International TUV IT 22 SIL 0093 TUV_SUD 2022-07-25
Metrological Metrological Certificate Belarus for D5000/D6000 Series ( BE ) Belarus 15507 ROSSTANDART 2022-08-30
Metrological Metrological Certificate Kazakhstan for D5000/D6000 series ( KK ) Kazakhstan 1152 KMC 2021-08-05
Metrological Metrological Certificate Russia for D5000/D6000 series ( RU ) Russia OC.C.32.004.A n. 77881 ROSSTANDART 2020-07-28
SIL TUV C-IS-722160171 SIL Certificate Summary ( EN ) International C-IS-722160171 TUV_SUD 2022-10-14

Declarations of Conformity


EU Declaration of Conformity for D6000 series ( EN | IT )
EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
Declaration of Conformity G3 compliance ( EN )

Dimensions


Image of D6263_size

Connections


Software


SWC5090 - Configurator for D5000/D5200, D6000/D6200 Series isolators ( EN )
Instruction Manual SWC5090 ( EN )