D5072D-087 G.M. International s.r.l.
GM International

D5072D-087
I.S. SIL2 Resistance Repeater

The Resistance Repeater D5072-087 accepts a resistance/RTD or transmitting potentiometer sensor, located in Hazardous Area, and repeats the resistance, with isolation, to Safe Area, suitable for applications requiring SIL 2 level in safety related systems for high risk industries.

FEATURES

  • SIL 2 / SC 3
  • Input from Zone 0/Div. 1
  • Installation in Zone 2/Div. 2
  • 2/3/4wire res./RTD or potentiometer input
  • Burnout Fault detection
  • Fully programmable operating parameters
  • High Accuracy
  • Three port isolation, Input/Output/Supply
  • High Density, two channels per unit

STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

2

Request a free and personalized quotation!

Technical Data


Supply

Voltage 24 Vdc nom (18 to 30 Vdc), reverse polarity protected
Current Consumption 37 mA @ 24 Vdc with 1 mA exitation current, typical.
Power Dissipation 0.9 W @ 24 Vdc with 1 mA excitation current, typical.

Input

Type 2-3 wire Resistance or 2 transmitting pot.
Integration time from 50 ms to 500 ms.
Input range 0 to 4 kΩ.
Measuring RTD current ≤ 0.15 mA.

Output

Type 2-3 wire resistance
Transfer characteristic linear, scaled or custom.
Response time 10 to 90 % step: ≤ 10.0 ms (slow), ≤ 1.2 ms (fast).
Output range 0 to 400 Ω.
Excitation current 0.1 to 10 mA.

Fault

Type Burnout / Internal fault. Output reflects fault condition via highscale (450 Ω) value forcing. Fault condition is also signaled via BUS and red LED on front panel.

Input to out performance

Ref. Conditions 24 V supply, 23 ± 1 °C ambient temperature, slow integration mode, 3 wires configuration for RTD, input/output range 10 to 400 Ω.
Calibration and linearity accuracy ≤ 200 mΩ typical (Excitation Current ≥ 1 mA); ≤ 300 mΩ typical (0.5 mA ≤ Excitation Current < 1 mA).
Temp. influence ± 20 mΩ/°C, typical (Excitation Current ≥ 1 mA).

Isolation

Test Voltage I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V.

Environmental conditions

Operating temperature temperature limits –40 to +70 °
Storage temperature temperature limits –45 to +80 °C.

Safety description

Equipment Associated apparatus and non-sparking electrical equipment.
Safety parameters Uo = 7.2 V, Io = 16 mA, Po = 27 mW, Ui = 12.8 V, Ci = 0 nF, Li = 0 nH at terminals 7-8-9, 10-11-12. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.

Mounting

Type DIN-Rail 35 mm, with or without Power Bus.
Weight about 135 g
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions Width 12.5 mm, Depth 123 mm, Height 120 mm.

Data Sheet


Datasheet of D5072-087 ( EN | DE | CN | JA | ES | FR | IT | PT )
D5000 Series Common Specifications and Dimensional Drawing ( EN )

Instruction Manual


Instruction Manual D5072-087 ( EN )
EAC Passport of D5072-087 ( RU )
Instruction Manual D5000-D5200 Series ( EN )
Instruction Manual SWC5090 ( EN | RU )
Safety Manual D5072-087 ( EN )
ATEX safety instruction manual for D5000 series ( EN | IT )
CCC Ex safety instruction manual for D5000 series ( EN | CN )
Ex safety instruction manual for D5000 series ( RU )
INMETRO safety instruction manual for D5000 series ( PT )
UL Control Drawing D5072 ( EN )

Certifications


Type Description Area Number Issued by Issue Date
ATEX DEKRA ATEX D5072, D5273 Series English Certificate ( EN ) Europe BVS 12 ATEX E 053 X DEKRA 2020-09-07
EMC D5000/D6000 EAC EMC Declaration of Conformity ( RU ) Eurasian Community ЕАЭС N RU Д-IT.АЖ38.В.00126/19 EUROCERT 2019-05-31
Ex D5000 CCC certificate for China ( EN ) China 2020322316000978 NEPSI 2023-04-30
Ex CML D5072, D5273 certificate for Japan ( EN ) Japan CML 22JPN2118X CML 2022-05-23
Ex EAC Ex Certificate for D5000 Series (2nd half) ( RU ) Eurasian Community ЕАЭС RU С-IT.AA87.В.00765/21 CCVE 2021-07-29
Ex Emirates Certificate of Conformity D5072, D5072-087, D5072-096, D5072-099, D5273 series ( EN ) United Arab Emirates 23-10-90275/E23-10-092691/NB0002 SGS 2023-10-31
Ex UL-cUL D5072, D5072-087, D5072-096, D5072-099 Divisions and Zones ( EN ) North America E222308-20190601 UL 2022-05-12
Ex INMETRO Certificate DNV 13.0110 X for D5072, D5273 ( EN ) Brazil DNV 13.0110 X - Rev.03 DNV-GL 2022-09-10
FSM TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) International TUV IT 22 SIL 0093 TUV_SUD 2022-07-25
IECEx DEKRA IECEx D5072, D5273 Series Certificate ( EN ) International IECEx BVS 12.0050X DEKRA 2020-09-18
Maritime KR Maritime Certificate D5000 Series ( EN ) International MIL20769-EL002 KR 2020-10-12
Maritime DNV Maritime Certificate TAA00001U0 for D5000 series for website ( EN ) International TAA00001U0 DNV-GL 2023-11-02
Metrological Metrological Certificate Belarus for D5000/D6000 Series ( BE ) Belarus 15507 ROSSTANDART 2022-08-30
Metrological Metrological Certificate Kazakhstan for D5000/D6000 series ( KK ) Kazakhstan 1152 KMC 2021-08-05
Metrological Metrological Certificate Russia for D5000/D6000 series ( RU ) Russia OC.C.32.004.A n. 77881 ROSSTANDART 2020-07-28
SIL TUV C-IS-722160171 SIL Certificate Summary ( EN ) International C-IS-722160171 TUV_SUD 2022-10-14

Declarations of Conformity


EU Declaration of Conformity for D5072, D5273 ( EN | IT )
EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
Declaration of Conformity G3 compliance ( EN )

Dimensions


Image of D5072_087_size

Connections


Drawings


2d_drawing_D5000_dwg ( EN )
3d_drawing_D5000_dwg ( EN )
3d_drawing_D5000_stp ( EN )

Software


SWC5090 - Configurator for D5000/D5200, D6000/D6200 Series isolators ( EN )
Instruction Manual SWC5090 ( EN )

RELATED PRODUCTS