SIL 3 Switch/Proximity Detector Repeater Relay Output


The dual channel Switch/Proximity Detector Repeater D6032D module is a unit suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries.
The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NE or ND SPST relay output contact.
Each channel enables a load to be controlled by a switch, or a proximity detector.
Fault detection circuit (DIP switch configurable) is available for both proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding output relay and turns the fault LED on; when disabled the corresponding output relay repeats the input line open or closed status as configured.
D6032D is programmable via dip switches as single input and two independent outputs.
Out 2 can be programmed for output duplicating Out 1 or Fault detection Out.
In case of duplication, relay actuation can be independently configured for each output.
In case of fault output, relay actuation can be programmed as normally energized or normally de-energized.
Mounting on customized Termination Boards.


• Systematic capability SIL 3.
• 2 fully independent channels.
• NO/NC switch/proximity Detector Input, NE/ND relay actuation mode.
• Field open and short circuit detection.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• In-field programmability by DIP Switch.
• High Density, two channels per unit.
• Simplified installation using customized Termination Boards.


18-30 Vdc


2 (1 Channel: D6032S)

SIL level



    DTS0830 D6032D data sheet (English) (PDF 281 KB)
    ISM0405D6032D instruction manual (PDF 630 KB)
    ISM0406D6032 safety manual (PDF 545 KB)
    CRT130TÜV SIL Functional Safety Certificate (PDF 64 KB)
    CRT303TÜV SIL Certificate Summary (PDF 989 KB)
    CRT323EAC EMC Declaration for D5000 and D6000 series (PDF 2.07 MB)


Request a quotation

« Previous: D6031S
Next: D6032S »