Supply |
|
Voltage
|
24 Vdc nom (18 to 30 Vdc), reverse polarity protected
|
|
Current Consumption
|
35 mA @ 24 Vdc, typical.
|
|
Power Dissipation
|
0.85 W @ 24 Vdc, typical.
|
Input |
|
Type
|
Millivolt or any type of thermocouple within Input Range.
|
|
Integration time
|
75 ms (fast), 375 ms (slow), user selectable.
|
|
Input range
|
-10 to +100 mV.
|
|
Thermocouple burnout current
|
≤ 50 µA.
|
Output |
|
Type
|
Millivolt.
|
|
Transfer characteristic
|
linear.
|
|
Response time
|
≤ 20 ms (10 to 90 % step).
|
|
Output range
|
-10 to +100 mV.
|
Fault |
|
Type
|
Output reflects burnout/internal fault condition via highscale (+110 mV)
value forcing. Fault condition is also signaled via BUS and red LED on front
panel.
|
Input performance |
|
Ref. Conditions
|
24 V supply, 23 ± 1 °C ambient temperature, slow
integration mode.
|
|
Calibration and linearity accuracy
|
≤ ± 10 µV.
|
|
Temp. influence
|
≤ ± 3 µV/°C, typical.
|
Output performance |
|
Ref. Conditions
|
24 V supply, 23 ± 1 °C ambient temperature, slow
integration mode.
|
|
Calibration and linearity accuracy
|
≤ ± 10 µA
|
|
Temp. influence
|
≤ ± 3 µV/°C, typical.
|
Isolation |
|
Test Voltage
|
I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V;
Out/Supply 500 V; Out/Out 500 V.
|
Environmental conditions |
|
Operating temperature
|
temperature limits –40 to +70 °
|
|
Storage temperature
|
temperature limits –45 to +80 °C.
|
Safety description |
|
Equipment
|
Associated apparatus and non-sparking electrical equipment.
|
|
Safety parameters
|
Uo = 7.2 V, Io = 16 mA, Po = 27 mW, Ui = 12.8 V, Ci = 0 nF,
Li = 0 nH at terminals 7-8-9, 10-11-12.
Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
|
Mounting |
|
Type
|
DIN-Rail 35 mm, with or without Power Bus.
|
|
Weight
|
about 135 g
|
|
Connection
|
by polarized plug-in disconnect screw terminal blocks to
accommodate terminations up to 2.5 mm² (13 AWG).
|
|
Dimensions
|
Width 12.5 mm, Depth 123 mm, Height 120 mm.
|
