TB-D5016-BAI-001 G.M. International S.p.A.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

TB-D5016-BAI-001

  1. Products
  2. Termination Boards
  3. BAI
TB-D5016-BAI-001
Termination Board 16 positions for Bailey INFI 90 with Analog Input cards IMASI02 (voltage signals), IMFEC12

This Termination Board (TB) provides direct connection between the I/O Card of the system and D5000 / D6000 Series modules. Intrinsically Safe protection and signal isolation between Safe and Hazardous Area are provided by D5000 Series Associated Apparatus. 24 Vdc Power Supply of the TB is connected to two plug-in terminal blocks, for a redundant power supply. Modules are supplied via TB power bus.

FEATURES

  • AI card type IMASI02, IMFEC12: 15 ch Analog Input board interfaces.
  • 16 positions Terminal Board for up to 30 channels.
  • IMASI02 (0)1-5 V signals.
  • Lower cables installation and maintenance costs.
  • Power supplies fault monitoring.
  • Spare fuse provided.
  • Mounting hardware provided for: Wall mounting, M4 thread screw; Wall mounting, M4 self tapping screw; Single Din Rail mounting kit.

Discover D5000


STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

15 or 30

Request a free and personalized quotation!

Contact us

Technical Data


Supply
Voltage 24 Vdc nom (18 to 30 Vdc) reverse polarity protected, double terminal blocks for redundant power supply, with OR diodes to mix supply voltages.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm2.
2 LEDs indication green color, one for supply 1 and one for supply 2.
Protection fuse 2 A time lag (spare fuse provided on Termination Board).

Fault detection
Preventive - abnormal supply voltage supply 1 or supply 2 is < 17 Vdc (Under Voltage, UV) or > 31 Vdc (Over Voltage, OV).
Critical - abnormal supply voltages or cumulative fault both supplies are in under (< 17 Vdc) or over (> 31 Vdc) voltage condition OR cumulative fault indication (about presence of short or open field circuit for any DO channel).

LED fault signaling (for both case 1 and 2)
Type 2 red LEDs (UV and OV of supply 1); 2 red LEDs (UV and OV of supply 2); a cumulative fault red LED.
Relay fault signaling (one for each case 1 or 2) voltage free NE SPDT - 1 Form C relay contacts (de-energized in fault condition)
Contact material AgCdO.
Contact rating 4 A 36 Vac 72 VA, 2 A 48 Vdc 80 W (resistive load).
Mechanical / electrical life 30 * 106 / 1 * 105 operation, typical.
Coil status LED indication yellow color, turn on when coil is energized.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm2.

I/O Card Interface
Connection four 36 poles AMP640506 male connectors (requires female mating connector).

HART Multiplexing
Connection two 34 poles male connectors (requires female mating connector).

Environmental conditions

Operating temperature limits – 40 to + 70 °C, relative humidity max 90 % non condensing, up to 35 °C.
Storage temperature limits – 45 to + 80 °C.

Mounting
Type Hardware included for mounting on wall and single DIN rail.
Weight about 400 g (excluding modules and mounting options).
Location Safe Area / Ordinary locations.
Dimensions Width 267 mm, Depth 176 mm, Height 125 mm.

Data Sheet


Datasheet of TB-D5016-BAI-001 ( EN )
ABB Bailey Infi 90 TB Summary ( EN | CN | JA | IT | PT | ES | DE | FR )

Certifications


Type Description Area Number Issued by Issue Date
EMC 5700 and TB EAC EMC Declaration of Conformity ( RU ) Eurasian Community ЕАЭС N RU Д-IT.PA08.B.82359/24 CONTROL 2024-09-26

Declarations of Conformity


EU Declaration Termination Boards TB, TBE, TUE ( EN | IT )
Declaration of Conformity G3 compliance ( EN )

Dimensions