TBE-D5008-MOD-003 G.M. International S.p.A.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

TBE-D5008-MOD-003

  1. Products
  2. Termination Boards
  3. MODICON
TBE-D5008-MOD-003
8-pos Term. Board for Modicon X80 BMXAMO0802 AO Card

This Termination Board with Enclosure (TBE) provides terminals for the direct connection between the I/O Card of the system and D5000 / D6000 Series modules. The Intrinsically Safe protection and signal isolation between Safe and Hazardous Area, is provided by D5000 Series Associated Apparatus. The 24 Vdc Power Supply of the TBE is connected to two plug-in terminal blocks, for a redundant power supply.

FEATURES

  • Modicon X80 AO board interface
  • 8 positions Termination Board for up to 8 channels
  • Lower cables installation and maintenance costs
  • Power supplies fault monitoring
  • Mounting hardware provided for single DIN Rail mounting kit

Discover D5000


STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

8

Request a free and personalized quotation!

Contact us

Technical Data


General
Number of positions 8
Maximum number of channels 8

Supply
Voltage 24 Vdc nom (20 to 30 Vdc), reverse polarity protected, double terminal blocks for redundant power supply, with OR diodes to mix supply voltages.
Max allowed current consumption 1.5 A (as total supply).
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm², screw fix.
Protection fuse 2 A time lag.

Fault detection
Type The on-board diagnostic monitors both power supplies integrity and the module cumulative fault. Any malfunction is reported by deactivating a solid-state relay and activating the corresponding LEDs.
Alarm is issued if 1) Power supply 1 or 2 < 17 Vdc or 2) Power supply 1 or 2 > 33 Vdc or 3) Module cumulative fault ON.
Alarm is removed if 1) 20 Vdc < Power supply 1 and 2 < 30 Vdc and 2) No module cumulative fault.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm², screw fix.
Output rating 100 mA 35 V (≤ 1 V voltage drop).

I/O Card Interface
Connection two 25 poles SUB-D male connectors (require female mating connectors).
Cable system cable BMX FTA XX2.
Redundant logic in redundant mode, each channel should force half current. In case of single channel fault (open circuit), the surviving one should provide full current.

HART Mux Interface
Connection 1 x 34-poles receptacle connector (require female mating connector).
Cable flat cable CABF032

Environmental conditions

Operating temperature temperature limits –40 to +70 °C.
Max altitude 2000 m a.s.l.
Storage temperature temperature limits –45 to +80 °C.

Mounting
Type Hardware included for mounting on single DIN-rail 35 mm.
Weight about 500 g, excluding modules with plastic clips.
Location installation in Safe Area.
Dimensions Width 140 mm, Depth 180 mm, Height 154 mm.

Data Sheet


Datasheet of TBE-D5008-MOD-003 ( EN )
Schneider MODICON M580 & M580 Safety Summary ( EN )

Instruction Manual


Instruction Manual Modicon M580 ( EN )

Declarations of Conformity


EU Declaration Termination Boards TB, TBE, TUE ( EN | IT )