TBE-D5016-GMI-003 G.M. International s.r.l.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

TBE-D5016-GMI-003

  1. Products
  2. Termination Boards
  3. GMI
TBE-D5016-GMI-003
16-pos Term. Board for D5000/D6000 Series with Terminals

This Termination Board with Enclosure (TBE) provides terminals for the direct connection between the I/O Card of the system and D5000 / D6000 Series modules. The Intrinsically Safe protection and signal isolation between Safe and Hazardous Area, is provided by D5000 Series Associated Apparatus. The 24 Vdc Power Supply of the TBE is connected to two plug-in terminal blocks, for a redundant power supply.

FEATURES

  • Universal board interfaces with terminals
  • 16 positions Termination Board for up to 32 channels
  • Zone 2 Installation (pending)
  • Power supplies fault monitoring
  • Mounting hardware provided for single DIN Rail mounting kit

Discover TERMINATION BOARDS


STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

16 or 32

Request a free and personalized quotation!

Contact us

Technical Data


General
Number of positions 16
Maximum number of channels 32

Supply
Voltage 24 Vdc nom (20 to 30 Vdc), reverse polarity protected, double terminal blocks for redundant power supply, with OR diodes to mix supply voltages.
Max allowed current consumption 1.5 A (as total supply).
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm², screw fix.
Protection fuse 4 A time lag.

Fault detection
Type The on-board diagnostic monitors both power supplies integrity and the module cumulative fault. Any malfunction is reported by deactivating a solid-state relay and activating the corresponding LEDs. Alarm is issued if: 1) Power supply 1 or 2 < 17 Vdc or 2) Power supply 1 or 2 > 33 Vdc or 3) Module cumulative fault ON. Alarm is removed if: 1) 20 Vdc < Power supply 1 and 2 < 30 Vdc and 2) No module cumulative fault.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm², screw fix.
Output rating 100 mA 35 V (≤ 1 V voltage drop).

I/O Card Interface
Connection 32+32 screw terminal blocks to accommodate terminations up to 2.5 mm², with exact correspondence to module 1-to-4 terminals.

Environmental conditions

Operating temperature temperature limits –40 to +70 °C.
Max altitude 2000 m a.s.l.
Storage temperature temperature limits –45 to +80 °C.

Mounting
Type Hardware included for mounting on single DIN-rail 35 mm.
Weight about 1.4 kg, excluding modules.
Location installation in Safe Area/Zone 2 (pending).
Dimensions Width 240 mm, Depth 180 mm, Height 154 mm.

Data Sheet


Datasheet of TBE-D5016-GMI-003 ( EN )

Instruction Manual


Instruction Manual Termination Boards GMI type ( EN )

Declarations of Conformity


EU Declaration Termination Boards TB, TBE, TUE ( EN )

Dimensions


Image of TBE-D5016-GMI-003_size

Connections