TB-D5008-HON-002 G.M. International s.r.l.
GM International

Termination Board 8 positions for Honeywell Safety Manager Digital Output Card SDO-0824

This Termination Board (TB) provides direct connection between the I/O Card of the system and D5000 Series modules. The Intrinsically Safe protection and signal isolation between Safe and Hazardous Area, is provided by D5000 Series Associated Apparatus. 24 Vdc Supply to the TB can be provided by dedicated system screws or by two plug-in terminal blocks, for a redundant power supply. The power supply for modules is given by TB power bus.


  • Support for Honeywell Safety Manager SDO-0824 8 ch. DO Card
  • 8 positions Terminal Board for up to 16 channels.
  • Lower cables installation and maintenance costs.
  • Power supplies fault monitoring.
  • Spare fuse provided.
  • Mounting hardware provided for: Wall mounting, M4 thread screw; Wall mounting, M4 self tapping screw; Single Din Rail mounting kit.


Product lifecycle policy (EN)


8 or 16

Request a free and personalized quotation!

Technical Data


Type 24 Vdc nom (20 to 30 Vdc) reverse polarity protected, double terminal blocks for redundant power supply, with OR diodes to mix supply voltages. Alternatively via dedicated Screws from Honeywell System.
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm2.
2 LEDs indication green color, one for supply 1 and one for supply 2.
Protection fuse 2 A time lag (spare fuse provided on Termination Board).

Fault detection

1) Abnormal supply voltage supply 1 or supply 2 is < 18 Vdc (Under Voltage, UV) or > 30 Vdc (Over Voltage, OV).
2) Cumulative module fault at least one of the modules reports a field/internal fault
LED fault signaling (for both case 1 and 2) 1 red LED for abnormal supply 1; 1 red LED for abnormal supply 2; a cumulative module fault red LED.
Relay fault signaling (one for each case 1 or 2) a voltage free NE SPDT - 1 Form C relay contacts (de-energized in fault condition)
Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm2.
Contact rating 2 A 36 Vac 72 VA, 2 A 48 Vdc 80 W (resistive load).

I/O Card Interface

Connection two 20 poles male connectors (require female mating connectors).

Environmental conditions

Operating temperature limits – 40 to + 70 °C, relative humidity max 90 % non condensing, up to 35 °C.
Storage temperature limits – 45 to + 80 °C.


Type Hardware included for mounting on wall and single DIN rail.
Weight about 220 g (excluding modules and mounting options).
Location Safe Area / Ordinary locations.
Dimensions Width 165 mm, Depth 175 mm, Height 125 mm.

Data Sheet

Datasheet of TB-D5008-HON-002 ( EN )
Honeywell Safety Manager TB Summary ( EN | RU | IT | CN | DE | FR | ES | PT | JA )

Declarations of Conformity

EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
EU Declaration Termination Boards TB, TBE, TUE ( EN )
Declaration of Conformity G3 compliance ( EN )