mV / mA Signal Converter. Low response time. SIL 2


The single channel DIN Rail mV/mA Converter, D1010S-056, converts a mV signal from sensors located in Hazardous Area, and repeat the current in floating circuit to drive a Safe Area load.


• Input from Zone 0 (one 20), installation in Zone 2.
• -5 to +55 mV Input / 4 to 20 mA Output.
• Input and Output short circuit proof.
• High Accuracy.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4.


24 V nom (20 to 30 V)



SIL level

D1010S-054 - SIL 3 mV to mA Converter

request a quotation


    DTS0197 D1010S-056 data sheet (English) (PDF 192 KB)
    ISM0071Functional Safety manual for SIL 2, SIL 3 applications (PDF 412 KB)
    ISM0102General D1000 Series Instruction Manual (PDF 2.39 MB)
    ISM0098D1010-054 -056 -057 (PDF 404 KB)
    ISM0155General D1000 Series Safety Instruction Manual (PDF 4.62 MB)
    CRT003ATEX certificate n. DMT 01 ATEX E 042 X (I.S.) (PDF 10.99 MB)
    CRT013EXIDA SIL2 SIL3 Analysis (03/07-24) (PDF 408 KB)
    CRT014Metrological Certificate for D1000 Series (Russia) (PDF 779 KB)
    CRT125IECEx CoC for D1000 Series (non-sparking) [link IECEx IMQ 13.0011X] (PDF 191 KB)
    CRT192EAC Ex Certificate for D1000 Series (PDF 3.15 MB)
    BUSPower Bus Optional Enclosure
    MCHP065Din Rail Anchor, for Terminal Block Side of Bus Power
    MOR016DIN Rail End Stopper Terminal Block
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
Are you interested in this product? Request a quotation, search for an expert or contact us.

« Previous: D1010S-054
Next: D1010S-057 »