D1063S

1 Ch, Load Cell / Strain Gauge Bridge Isolating Repeater

Description

The single channel DIN Rail Load Cell/Strain Gauge Bridge Isolating Repeater D1063S acts as a transparent galvanic isolated interface installed between a weighing indicator in Safe Area and a load cell (or group of load cells) in Hazardous Area; it appears at the terminals of the indicator as a single load cell equivalent to the one in the field. Provides a fully floating power supply voltage with remote sensing capability to load cell located in Hazardous Area and repeats, while isolating, the mV signal output to drive a load in Safe Area depending on the host system reference voltage. Up to four 350 Ω load cells, or six 450 Ω load cells, or twelve 1000 Ω load cells can be connected in parallel. Voltage reference (Safe Area side) is DIP switch configurable to select internal or external (host system) supply. In addition a field wiring fault red LED indicates any wire break in the Hazardous Area side.

Features

• Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
• Strain Gauge Bridge Transparent Repeater.
• Up to four 350 Ω load cells in parallel or up to six 450 Ω load cells in parallel or up to twelve 1000 Ω load cells in parallel.
• Broken field wire fault detection.
• High Accuracy.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4.
• In-field programmability by DIP switch.
• High Reliability, SMD components.
• Simplified installation using standard DIN Rail and plug-in terminal blocks.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.
Image of D1063S (Web)

Download

    Datasheet of D1063 ( EN )
    D1000 Series Common Specifications and Dimensional Drawing ( EN )
    Instruction Manual D1063 ( EN )
    Instruction Manual D1000 Series ( EN )
    Ex safety instruction manual for D1000 series ( EN | IT )
    INMETRO safety instruction manual for D1000 series ( PT )
    PSD1000 Supply for D1000 Series AC Input ( EN )
    ATEX > GMI > IMQ Zone 2 Applications D1000 Series Certificate ( EN )
    ATEX > PRESAFE > Presafe ATEX for D1054, D1061, D1063 ( EN )
    EAC_EMC > EAC > D1000 EAC EMC Declaration of Conformity ( RU )
    EAC_EX > TECHNOPROGRESS > EAC Ex Certificate for D1000 Series ( RU )
    HAZARDOUS_LOCATION > FM > FM No.3024643-3029921C Certificate ( EN )
    IECEX > GMI > IMQ IECEx Zone 2 Applications D1000 Series Certificate ( EN )
    IECEX > PRESAFE > Presafe IECEx for D1054, D1061, D1063 ( EN )
    INMETRO_EX > DNV-GL > INMETRO Certificate DNV 13.0135 X for D1054, D1061, D1063 ( EN )
    MARITIME > GMI > KR Maritime Certificate D1000 Series ( EN )
    MARITIME > DNV-GL > DNV Maritime Certificate TAA00002BM for D1000 Series ( EN )
    RUSSIA_METROLOGICAL > GMI > Metrological Certificate Russia for D1000 Series ( RU )
    EU Declaration of Conformity for D1054, D1061, D1063 ( EN | IT )
    EU Declaration of Conformity for D1000 series (zone 2) ( EN | IT )
    EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
    Declaration of G3 compliance for D1000_PSD1000-PSD1001-PSD1001C-PSD1004-PSD1220-PSD1220-098 SERIES ( EN )
    Product Overview ( EN | FR | DE | CN | RU | JA )
    D1000 Series Presentation ( RU )
    2D_drawing_D1000_dwg ( EN )
    3D_drawing_D1000_dwg ( EN )
    3D_drawing_D1000_stp ( EN )
    BUSPower Bus Optional Enclosure
    CABF012Dedicated cable for load cell 3x2x1 mm2 with 3+overall screen
    MCHP065Din Rail Anchor, for Terminal Block Side of Bus Power
    MOR016DIN Rail End Stopper Terminal Block
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
    PPC1092D1000 Series Serial Adapter Configurator.

Status

PHASE-OUT
Next: SPARE-ONLY (01/01/2027)

> Product lifecycle policy ( EN )

Alternatives

D5263S

 

Request a quotation

« Previous: D1062S
D1063S
Next: D1064S »