D1010S-057 G.M. International s.r.l.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

D1010S-057

  1. Products
  2. Intrinsically Safe Isolators
  3. Analog Input
D1010S-057
mV to mA Converter DIN-Rail Models

The single channel DIN Rail mV to mA converters, D1010S-054, D1010S-056, D1010S-057, convert a mV signal from sensors located in Hazardous Area, and repeat the current in floating circuit to drive a Safe Area load.

FEATURES

  • Input from Zone 0 (Zone 20),installation in Zone 2.
  • -5 to +55 mV Input / 4 to 20 mA Output.
  • Input and Output short circuit proof.
  • High Accuracy.
  • Three port isolation, Input/Output/Supply.
  • EMC Compatibility to EN61000-6-2, EN61000-6-4.
  • 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Discover D1000


STATUS

 
   SPARE-ONLY
Next: OBSOLETE (2025-12-31)

Product lifecycle policy (EN)

CHANNELS

1

Request a free and personalized quotation!

Contact us

Technical Data


Supply
Type 24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp.
Current Consumption 40 mA with 20 mA output typical.
Power Dissipation 0.9 W with 24 V supply voltage and 20 mA output typical
Max. power consumption at 30 V supply voltage and overload condition 1.2 W.

Input
Type -5 to +10 mV

Output
Type 4 to 20 mA, on 250 Ω load in source mode.
Response time 25 ms (10 to 90 % step change) with 8.6 dB of NMRR.
Common mode rejection better than 80 dB.
Output ripple ≤ 20 mVrms on 250 Ω load.
Burnout Upscale in 25 ms.

Performance
Type Ref. Conditions 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature
Calibration accuracy ≤ ± 0.1 % of full scale
Linearity error ≤ ± 0.1 % of full scale
Supply voltage influence ≤ ± 0.02 % of full scale for a min to max supply change.
Load influence ≤ ± 0.02 % of full scale for a 0 to 100 % load resistance change.
Stability estimated degradation in 3 years ≤ ± 0.47 % least sensitive range.

Isolation
Test Voltage I.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV; Out/Supply 500 V

Environmental conditions

Operating temperature limits -20 to + 60 °C, relative humidity max 95 %.
Storage temperature limits -45 to + 80 °C.

Safety description
Safety parameters Uo/Voc = 1.1 V, Io/Isc = 38 mA, Po/Po = 11 mW at terminals 15-16. Ui/Vmax = 30 V, Ii/Imax = 104 mA, Ci = 1.05 nF, Li = 0 nH at terminals 15-16. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.

Mounting
Type EN/IEC60715 TH 35 DIN-Rail.
Weight about 110 g.
Connection by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2.
Location Safe Area or Zone 2, Group IIC T4 installation.
Protection class IP 20.
Dimensions Width 22.5 mm, Depth 99 mm, Height 114.5 mm.

Data Sheet


Datasheet of D1010-054/056/057 ( EN )
D1000 Series Common Specifications and Dimensional Drawing ( EN )

Instruction Manual


Instruction Manual D1010-054, -056, -057 ( EN )
Instruction Manual D1000 Series ( EN | RU )
Instruction Manual for SIL Related Barrier ( EN )
Ex safety instruction manual for D1000 series ( EN | IT )

Certifications


Type Description Area Number Issued by Issue Date
ATEX DEKRA ATEX D1000 Series English Certificate ( EN ) Europe DMT 01 ATEX E 042 X DEKRA 2022-04-25
ATEX IMQ Zone 2 Applications D1000 Series Certificate ( EN ) Europe IMQ 09 ATEX 013 X IMQ 2022-05-03
EMC D1000 EAC EMC Declaration of Conformity ( RU ) Eurasian Community ЕАЭС N RU Д-IT.НХ37.В.06311/20 EUROCERT 2020-08-13
Ex EAC Ex Certificate for D1000 Series ( RU ) Eurasian Community ЕАЭС RU С-IT.НА67.В.00113/20 TECHNOPROGRESS 2020-09-04
Ex INMETRO Certificate DNV 13.0108 X for D1000 series ( EN ) Brazil DNV 13.0108 X DNV 2022-12-10
IECEx IMQ IECEx Zone 2 Applications D1000 Series Certificate ( EN ) International IECEx IMQ 13.0011X IMQ 2022-05-03
IECEx DEKRA IECEx for D1000 Series ( EN ) International IECEx BVS 07.0027X DEKRA 2022-05-30
Metrological Metrological Certificate Russia for D1000 Series ( RU ) Russia 64283-11 ROSSTANDART 2021-03-10

Declarations of Conformity


EU Declaration of Conformity D1000 series ( EN | IT )
EU Declaration of Conformity for D1000 series (zone 2) ( EN | IT )
EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
Declaration of G3 compliance for D1000_PSD1000-PSD1001-PSD1001C-PSD1004-PSD1220-PSD1220-098 SERIES ( EN )

Dimensions


Image of D1010S-054/056/057_size

Connections


Drawings


2d_drawing_D1000_dwg ( EN )
3d_drawing_D1000_dwg ( EN )
3d_drawing_D1000_stp ( EN )

RELATED PRODUCTS


D1010S-054

D1010S-054

D1010S-056

D1010S-056