ciao

D5072D-099

2 ch, Temperature Signal Converter, Multifunction Sink out, SIL 2

Description

Input from Zone 0 (Zone 20) / Division 1, installation in Zone 2 / Division 2.
•mV, thermocouple, 2 or 3 or 4 wire resistance/RTD or transmitting potentiometer Input Signal.
•2-wire RTD line resistance compensation.
•Internal Reference Junction Compensation.
•Fastest integration time: 50 ms.
•Fully customizable Output range from 0 to 24 mA Output Signal linear or reverse (typical 0/4-20 mA).
•Output duplication possible for D5072D-099.
•Modbus RTU RS-485 Output.
•Independent multiple Fault detection.
•Programmable alarm available on solid state contact output or Termination Board connector.
•High Accuracy, μP controlled A/D converter.
•Three port isolation, Input/Output/Supply.
•EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
•Fully programmable operating parameters.
•ATEX, IECEx, INMETRO, EAC-EX, UKR TR n. 898, NEPSI Certifications.
•TÜV Certification (pending).
•High Density, two channels per unit.
•Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.
•250 Vrms or Vdc (Um) max. voltage allowed to the instruments associated with the barrier.
•Data logging and monitoring via software.

Supply

24 Vdc

Channels

2

SIL level

SIL 2

Download

    DTS0813 D5072-099 data sheet (English) (PDF 343 KB)
    ISM0389D5072-099 Instruction Manual (PDF 623 KB)
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D5072D-096
D5072D-099
Next: D5072S »