ciao

D5072S-099

1 ch, Temperature Signal Converter, Multifunction Sink out, SIL 2

Description

The single channel Temperature Signal Converter D5072S-099 accepts a low level dc signal from millivolt, thermocouple or resistance/ RTD or transmitting potentiometer sensor, located in Hazardous Area, and converts, with isolation, the signal to drive a Safe Area load, suitable for applications requiring SIL 2 level (according to IEC 61508:2010 ed.2) in safety related systems for high risk industries.

Features

Input from Zone 0 (Zone 20) / Division 1, installation in Zone 2 / Division 2.
•mV, thermocouple, 2 or 3 or 4 wire resistance/RTD or transmitting potentiometer Input Signal.
•2-wire RTD line resistance compensation.
•Internal Reference Junction Compensation.
•Fastest integration time: 50 ms.
•Fully customizable Output range from 0 to 24 mA Output Signal linear or reverse (typical 0/4-20 mA).
•Output duplication possible for D5072D-099.
•Modbus RTU RS-485 Output.
•Independent multiple Fault detection.
•Programmable alarm available on solid state contact output or Termination Board connector.
•High Accuracy, μP controlled A/D converter.
•Three port isolation, Input/Output/Supply.
•EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
•Fully programmable operating parameters.
•ATEX, IECEx, INMETRO, EAC-EX, UKR TR n. 898, NEPSI Certifications.
•TÜV Certification (pending).
•High Density, two channels per unit.
•Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.
•250 Vrms or Vdc (Um) max. voltage allowed to the instruments associated with the barrier.
•Data logging and monitoring via software.

Channels

1

SIL level

SIL 2

Download

    DTS0813 D5072-099 data sheet (English) (PDF 343 KB)
    ISM0389D5072-099 Instruction Manual (PDF 623 KB)
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D5072S-096
D5072S-099
Next: D5090S »