SIL 2 Switch/Proximity Detector Repeater, Relay Output DIN-Rail


The dual channel Switch/Proximity Detector Repeater, D6030D module is a unit suitable for applications requiring SIL 2 level (according to IEC 61508) in safety related systems for high risk industries.
The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NE or ND SPST (D6030D).
Each channel enables a load to be controlled by a switch, or a proximity detector.
Fault detection circuit (DIP switch configurable) is available for both proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding output relay and turns the fault LED on; when disabled the corresponding output relay repeats the input line open or closed status as configured.
D6030D is programmable via dip switches as single input and two independent outputs.
Out 2 can be programmed for output duplicating Out 1 or Fault detection Out.
In case of duplication, relay actuation can be independently configured for each output.
In case of fault output, relay actuation can be programmed as normally energized or normally de-energized.
Mounting on standard DIN-Rail, with or without Power Bus.


• 2 fully independent channels.
• NO/NC switch/proximity Detector Input,NE/ND relay actuation mode.
• Field open and short circuit detection.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4,EN61326-1, EN61326-3-1 for safety system.
• In-field programmability by DIP Switch.
• High Density, two channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus.


2 (1 Channel: D6030S)

SIL level

D6030D - SIL 2 non I.S. Switch/Proximity Detector Repeater

request a quotation


    DTS0462 D6030D data sheet (English) (PDF 296 KB)
    ISM0213D6030D instruction manual (PDF 716 KB)
    JDFT04912mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D6020S
Next: D6030S »