SIL 3 Switch/Proximity Interface


The single channel Switch/Proximity Detector Interface D6034S is a high integrity repeater, designed to interface contacts or proximity detectors
(EN60947-5-6, NAMUR) and is suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries.
Field loop integrity and status (line plus contact or proximitor) are continuously and directly monitored, in transparent mode, into the PLC, ESD, DCS using their existing input line, without requiring an additional channel for line fault detection.
Mounting on standard DIN-Rail, with or without Power Bus, or on customized
Termination Boards.


• Systematic capability SIL 3
• Transparent mode operation.
• Field open and short circuit detection available to the PLC/DCS card.
• Input and Output short circuit proof
• High Accuracy.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• High Density, two channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.


18-30 Vdc


1 (2 channels: D6034D)

SIL level

D6034S - SIL 2 non I.S. Switch/Proximity Interface


    DTS0584 D6034S data sheet (English) (PDF 294 KB)
    ISM0215D6034S instruction manual (PDF 471 KB)
    ISM0401D6034 safety manual (PDF 282 KB)
    CRT130TÜV SIL Functional Safety Certificate (PDF 64 KB)
    CRT303TÜV SIL Certificate Summary (PDF 989 KB)
    CRT323EAC EMC Declaration for D5000 and D6000 series (PDF 2.07 MB)
    JDFT04912mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power


Request a quotation

« Previous: D6034D
Next: D6036D »