Non-IS SIL 2 Quadruple Repeater Power Supply


The quadruple channel Repeater Power Supply D6212Q provides a fully floating DC supply for energizing conventional 2 wires 4-20 mA transmitters, and repeats the current to drive a load.


• Quadruple channels for 2 wires Transmitters or externally powered transmitters.
• 0/4-20 mA Input, Output Signals.
• Input and Output short circuit proof.
• Source current Outputs.
• Modbus RTU RS-485 Output.
• Fully programmable operating parameters.
• High Accuracy, μP controlled A/D converter.
• Three port isolation, Input / Output / Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• High Density, four channels per unit.
• Out of range (Burnout) fault detection
• Open-drain alarm output with user-settable trip point
• Simplified installation using standard DIN-Rail and plug-in terminal blocks or customized Termination Boards.


21.5-30 Vdc



SIL level

D6212Q - SIL 2 Quadruple Repeater Power Supply


    DTS0460 D6212 data sheet (English) (PDF 267 KB)
    ISM0154SWC5090 Instruction Manual (PDF 4.71 MB)
    CRT112Metrological Certificate for D5000/D6000 series (Russia) (PDF 9.10 MB)
    CRT323EAC EMC Declaration for D5000 and D6000 series (PDF 2.07 MB)
    SWC5090D5000/D6000 Software Configurator for Windows
    JDFT05022mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
    PPC5092D5000 Series Adapter for Configuration


Request a quotation

« Previous: D6072S-099
Next: D6231E »